Company Information Payne and Dolan, Inc. is an asphalt mixture producer. Payne and Dolan, Inc. Control 5 Fitchburg Plant, a stationary asphalt plant at
6145 Cottonwood Dr, Fitchburg, WI 53719, USA
Product Description This EPD reports the potential environmental impacts and additional environmental information for an asphalt mixture, which falls under the United Nations Standard Products and Services Code 30111509. Asphalt mixtures are typically incorporated as part of the structure of a roadway, parking lot, driveway, airfield, bike lane, pedestrian path, railroad track bed, or recreational surface. Mix Name: MT-503722-HMA .605" - 16% RAP Specification Entity: WisDOT Specification: 250-0085-2022 Gradation Type: other Mix Design Method: superpave Nominal Maximum Aggregate Size: 0.625 inches
Performance Grade of Asphalt Binder: PG 58-28 Customer [Project/Contract] Number: Not Reported This mix producer categorizes this product as a Hot Mix Asphalt (HMA) asphalt mixture. This asphalt mixture was produced within a temperature range of 138 to 160°C (280.0 to 320.0°F) f. Energy and environmental impacts are based on a plant’s average performance over a 12‑month period and are not adjusted for mix‑specific production temperatures.
Data Completeness Statement: Upstream data for one or more of the ingredients representing less than 1% (individually) or 5% (total) of the total mass of this asphalt mixture is not available. The upstream environmental impacts associated with manufacturing these ingredients are not accounted for in this EPD. See Table 1 for more information.
This declaration is an EPD in accordance with ISO 14025:2006 1 and ISO 21930:2017 2 . The PCR is Product Category Rules for Asphalt Mixtures 3,4 . This EPD transparently describes the potential environmental impacts associated with the identified life cycle stages of the described product. Declaration Number: 14.306.971 v4Soſtware Version: 2.0.1 Date of Issue: May 31, 2023Period of Validity: March 31, 2027 This EPD is valid for asphalt mixtures produced at the location indicated on this page. Data used to inform this EPD reflect plant operations from a 12-month period beginning on Jan. 1, 2022. This EPD can be found at https://asphaltepd.org/epd/d/ZXU7Xl/ LCA performed by: Ben Ciavola, PhD An Environmental Product Declaration (EPD) for Asphalt Mixtures
2 Product Ingredients The product ingredients as identified in the mix design are provided in the table below. TABLE 1. PRODUCT INGREDIENTS COMPONENT MATERIAL WEIGHT %
Aggregate Natural Stone 11
Aggregate Natural Stone 11
Aggregate Natural Stone 32
Aggregate Natural Stone 25
RAP Reclaimed Asphalt Pavement 15
Binder Unmodified + 1 terminal additive(s)* 5
*Indicates that this material is a data gap. Upstream data associated with extraction and processing is not accounted for in this EPD. Regulated Hazardous Substances Regulated hazardous substances, if applicable, are listed on the safety data sheet (SDS) associated with this asphalt mixture. The chemical names and composition of the mix from the SDS are provided here for transparency. TABLE 2. REGULATED HAZARDOUS SUBSTANCES CHEMICAL NAME CAS NO. WEIGHT %
Aggregate (crushed stone, sand, gravel, slag) Various 65.0 < 95.0
Petroleum asphalt / bitumen^ 8052-42-4 3.0 < 7.0
Reclaimed Asphalt Pavement (RAP) Mix < 30.0
Reclaimed Asphalt Shingles (RAS) Mix < 10.0
Polymers and Natural Rubbers Various < 0.5
Process oils (inherent in refined petroleum asphalt) Various < 0.1
Anti-strip or other amine-based additives Various < 0.1
Warm-mix additives Various < 0.1
An Environmental Product Declaration for Asphalt Mixtures
3 TABLE 3. ENVIRONMENTAL IMPACT SUMMARY TABLE IMPACT CATEGORY POTENTIAL IMPACT PER METRIC TONNE ASPHALT MIXTURE (PER TON ASPHALT MIXTURE) Global warming potential (GWP‑100) 63.82 (57.90) kg CO2 Equiv. Ozone depletion potential (ODP) 8.88e-08 (8.05e-08) kg CFC‑11 Equiv. Eutrophication potential (EP) 1.28e-02 (1.16e-02) kg N Equiv. Acidification potential (AP) 1.61e-01 (1.46e-01) kg SO2 Equiv Photochemical ozone creation potential (POCP) 3.93 (3.57) kg O3 Equiv. Methodological Framework DECLARED UNIT The declared unit is 1 metric tonne (1 short ton) of an asphalt mixture (UNSPSC Code 30111509: Asphalt Based Concrete), which is defined as “a plant‑produced composite material of aggregates, asphalt binder, and other materials.” 3 LIFE CYCLE STAGES AND INFORMATION MODULES This is a cradle to gate EPD. It covers the raw material supply, transport, and manufacturing life cycle stages (modules A1‑A3). It does not include construction (placement and compaction), use, maintenance, rehabilitation, or the end‑of‑life life cycle stages (modules A4‑5, B1‑7, and C1‑4). 3 Materials (A1): This stage includes raw material extraction and manufacturing (e.g., quarry operations for aggregates, petroleum extraction and refinery operations for asphalt binder production, etc.) based on the relative proportion of ingredients in the mix design. Transport (A2): This stage includes transport of raw materials to the asphalt plant based on actual transportation distances and modes for ingredients in the mix design. Production (A3): This stage comprises plant operations involved in the production of asphalt mixtures, including generation of electricity and heat used during asphalt mix production (e.g., extraction, refining, and transport of fuels). Data for this stage is plant specific. LIFE CYCLE INVENTORY This EPD was created using plant‑specific data for asphalt mix production of the production stage (A1‑A3). Potential variations due to asphalt mixture design, supplier locations, manufacturing processes, efficiencies, and energy consumption are accounted for in this EPD. All upstream data sources are prescribed in the Product Category Rules (PCR) and are publicly available and freely accessible to enhance transparency and comparability. Use of the prescribed data sources improves comparability among the EPDs developed by limiting variability due to differences in the upstream data within the system boundaries. 3 ALLOCATION PROCEDURES Impacts from upstream production and transportation of raw materials are subdivided based on the relative material quantities (percentages) in the mix design. For conventional asphalt plants that produce both hot‑mix asphalt (HMA) and warm‑mix asphalt (WMA) mixtures, allocation of energy and other resources for asphalt mix production is on a mass basis. Mix‑specific production temperatures are not used to separately allocate energy inputs to HMA and WMA mixtures. For conventional asphalt plants that also produce asphalt mixtures at ambient temperatures using cold central plant recycling (CCPR) technologies, HMA and WMA mixtures are subdivided from CCPR mixtures by segregating burner fuel consumption from CCPR mixtures. An Environmental Product Declaration for Asphalt Mixtures MATERIALS (A1) TRANSPORT (A2) PRODUCTION (A3) Cradle-to-Gate END OF LIFE (C1–C4) USE (B1, B6, B7) MAINTENANCE & REHABILITATION (B2–B5) CONSTRUCTION (A4, A5) Pavement Life Cycle
4 For input materials that are manufactured using processes that produce one or more co‑products, the prescribed upstream datasets allocate the material production impacts according to principles outlined in the PCR for Asphalt Mixtures and ISO 21930. Examples of these processes include petroleum refining (which produces multiple co‑products including asphalt binder, petroleum fuels, and other products) and iron and steel manufacturing (which produces iron and steel along with slag aggregates). Waste materials and other outputs such as byproducts generated during asphalt mixture production exit the asphalt mixture product system burden free. Materials, energy, and environmental impacts are not allocated to waste materials or byproducts. CUT‑OFF PROCEDURES Secondary (recycled) materials are evaluated using the cut‑off approach. The cut‑off boundary is defined as the point beginning aſter secondary materials are transported to a central storage or processing location. Material flows and potential environmental impacts associated with the previous product system, including deconstruction, demolition, disposal, and transport to the processing location, are not accounted for in this EPD because the recycled materials are modeled as entering the asphalt mixture product system burden‑free. In some cases, limitations in upstream datasets require these recovery and transportation processes to be included, which is a conservative approach. Processing of secondary materials for use in asphalt mixtures and transport to the asphalt plant are included in modules A1 and A2, respectively. Processing and transport of secondary fuels to the asphalt plant are included in module A3. LIMITATIONS This EPD reports the results of a cradle to gate life cycle assessment (LCA) for asphalt mixtures. This EPD may be used as a data input for full LCAs to compare the environmental impacts of different asphalt roadway, parking lot, or recreational pavement design alternatives. COMPARABILITY EPDs that comply with the PCR for Asphalt Mixtures (and, by extension, ISO 21930) are comparable if the mixtures are expected to meet similar functional and design performance criteria as specified by the customer, such as meeting the same customer specification. Comparability may be limited by the presence of data gaps. EPDs with data gaps should not be compared to each other unless the composition and quantity of material ingredients with data gaps is known to be the same for all products being compared. When asphalt mixtures have different performance expectations, the asphalt mixtures can only be compared by using EPDs as a data input for an LCA study that includes additional life cycle stages relevant to the functional unit defined in the LCA. LIFE CYCLE ASSESSMENT
The information presented in this EPD can be used to model the environmental impacts of asphalt mixtures purposed to be part of (but not limited to) roadway, parking lot, or recreational pavements. This EPD alone does not provide the environmental impacts of the entire pavement structure itself and does not make any statements that the product covered by the EPD is better or worse than any other product.
LIFE CYCLE IMPACT ASSESSMENT RESULTS The life cycle impact assessment results are relative expressions and do not predict actual impacts on category endpoints, the exceeding of thresholds, safety margins, or risks. Calculations are based on the TRACI v2.1 impact assessment methodology. An Environmental Product Declaration for Asphalt Mixtures
5 An Environmental Product Declaration for Asphalt Mixtures TABLE 4. LIFE CYCLE IMPACT INDICATORS ACRONYM INDICATOR UNIT QUANTITY PER METRIC TONNE ASPHALT MIXTURE (PER SHORT TON ASPHALT MIXTURE) MATERIALS (A1) TRANSPORT (A2) PRODUCTION (A3) TOTAL (A1‑A3) GWP‑100 Global warming potential, incl. biogenic CO2 kg CO2 Equiv. 35.04 (31.79) 2.54 (2.30) 26.24 (23.80) 63.82 (57.90) ODP Ozone depletion potential kg CFC‑11 Equiv.
1.60e-08
(1.45e-08)
1.53e-08
(1.39e-08)
5.75e-08
(5.21e-08)
8.88e-08
(8.05e-08)
EP Eutrophication potential kg N Equiv. 9.39e-03
(8.52e-03)
7.57e-04
(6.87e-04)
2.69e-03
(2.44e-03)
1.28e-02
(1.16e-02)
AP Acidification potential kg SO2 Equiv. 1.01e-01
(9.14e-02)
1.29e-02
(1.17e-02)
4.75e-02
(4.31e-02)
1.61e-01
(1.46e-01)
POCP Photochemical ozone creation potential kg O3 Equiv. 2.09 (1.89) 0.42 (0.38) 1.43 (1.30) 3.93 (3.57) Notes: GWP‑100 – Global warming potential. The warming (relative to CO2 ) that chemicals contribute to the atmospheric greenhouse effect by trapping the earth’s heat. The impact scores for GWP‑100 are based on a 100‑year time horizon. As prescribed in Section 7.2.7 of the PCR for Asphalt Mixtures, this EPD does not assign a negative flow of CO2 to GWP‑100 when biogenic CO2 enters the product system through biofuels and bio‑based materials unless this information is provided in upstream datasets, in which case the amounts are indicated in Table 7. However, a positive flow of CO2 is assigned to GWP‑100 when biogenic CO2 is emitted through the combustion of biofuels. This is a conservative approach that may over‑estimate GWP‑100. Bio‑based materials tend to be used in small quantities in asphalt mixtures (<1% by weight of the mix) and biofuels are rarely used for asphalt mixture production, so the impacts are low in most cases. Biogenic carbon uptake for certain biofuels is provided as additional environmental information in Table 9. The location‑based accounting method, is used for calculating upstream impacts of purchased electricity. Potential GHG emission reductions associated with the market‑based accounting method, if applicable, are provided as Additional Environmental Information in Table 8. ODP – Ozone depletion potential. The potential damage that chemicals such as chlorofluorocarbons (CFCs) cause to the earth’s stratospheric ozone layer, which filters out harmful ultraviolet radiation from the sun. Impact scores for ODP are based on the quantity of ozone‑depleting chemicals released to air, normalized to an equivalent mass of CFC‑11. EP – Eutrophication potential. The potential nutrient enrichment to water bodies caused by chemicals that are released to the water or air and subsequently deposited. Impact scores for EP are based on the quantity of nutrients released, normalized to an equivalent mass of N. AP – Acidification potential. The potential formation of acid rain caused by releases of chemicals to the air. Impact scores for AP are based on the number of hydrogen ions that can be theoretically formed per mass unit of the chemical being releases as compared to SO2 . POCP – Photochemical ozone creation potential. The release of hydrocarbons and nitrogen oxides that react with sunlight to produce photochemical oxidants, which can cause or aggravate health problems, plant toxicity, and deterioration of certain materials. Impact scores for POCP are based on the quantity of chemicals with POCP equivalency factors released to the air, normalized to an equivalent mass of O3 .
6 An Environmental Product Declaration for Asphalt Mixtures Materials and Resources TABLE 5. RESOURCE USE INDICATORS ACRONYM INDICATOR UNIT QUANTITY PER METRIC TONNE ASPHALT MIXTURE (PER SHORT TON ASPHALT MIXTURE) MATERIALS (A1) TRANSPORT (A2) PRODUCTION (A3) TOTAL (A1‑A3) RPR E Renewable primary resources used as an energy carrier (fuel) MJ 10.67 (9.68) 0.00 (0.00) 0.01 (0.01) 10.68 (9.69) RPR M Renewable primary resources with energy content used as material MJ 0.00 (0.00) N/A N/A 0.00 (0.00) NRPR E Non‑renewable primary resources used as an energy carrier (fuel) MJ 668 (606) 34 (31) 452 (410) 1154 (1047) NRPR M Non‑renewable primary resources with energy content used as material MJ 2166 (1965) N/A N/A 2166 (1965) SM Secondary (recycled) materials kg 153 (139) N/A 0 153 (139) RSF Renewable secondary fuels MJ N/A N/A 0.00 (0.00) 0.00 (0.00) NRSF Non‑renewable secondary fuels MJ N/A N/A 0.00 (0.00) 0.00 (0.00) RE Recovered energy MJ N/A N/A 0.00 (0.00) 0.00 (0.00) FW Consumption of fresh water m 3 7.16e+00 (6.49e+00) N/A 4.17e-03 (3.79e-03) 7.16e+00 (6.50e+00) ADP fossil Abiotic depletion potential for fossil resources MJ 2822 (2560) 7 (6) 450 (408) 3278 (2974) Notes: RPR E – First use bio‑based materials used as an energy source. Hydropower, solar, and wind power used in the technosphere are also included in this indicator. Calculations for A3 are based on the regional grid energy mix for the balancing authority and does not account for on‑site renewable energy generation. RPR M – First use bio‑based materials used as materials (e.g., bio‑based additives, bio‑based asphalt extenders, etc.). NRPR E – First use non‑renewable materials such as peat, oil, gas, coal, and uranium used as an energy source. NRPR M – First use non‑renewable primary resources such as oil, gas, and coal used for products (e.g., asphalt binder, plastic‑based products, etc.). SM – Materials recycled from previous use or waste (e.g., reclaimed asphalt pavement (RAP), recycled asphalt shingles (RAS), ground tire rubber (GTR), etc.). These include both renewable and non‑renewable material, with or without energy content, depending on the status of the material when it was originally extracted from the environment. RSF – Renewable materials with energy content that have crossed the system boundary between product systems and are used as fuel input (energy source) in another product system (e.g., chipped waste wood, yellow grease). NRSF – Non‑renewable materials with energy content that have crossed the system boundary between product systems and are used as fuel input (energy source) in another product system (e.g., recycled fuel oil, tire‑derived fuel, etc.). RE – Energy recovered from disposal of waste in previous systems, such as energy recovery from combustion of landfill gas or energy recovered from other systems using energy sources. FW – This indicator is oſten not included in upstream (background) datasets for raw materials and energy. For Module A1, 85% of the material inputs, by total weight of the mix, are accounted for. Upstream datasets for transportation (A2) and energy inputs (A3) do not account for consumption of fresh water. ADP fossil – Abiotic depletion potential for fossil resources.
7 An Environmental Product Declaration for Asphalt Mixtures TABLE 6. WASTE AND MATERIAL FLOW INDICATORS ACRONYM INDICATOR UNIT QUANTITY PER METRIC TONNE ASPHALT MIXTURE (PER SHORT TON ASPHALT MIXTURE) MATERIALS (A1) TRANSPORT (A2) PRODUCTION (A3) TOTAL (A1‑A3) Waste Categories HWD Hazardous waste disposed kg N/A N/A 0.00 (0.00) 0.00 (0.00) NHWD Non‑hazardous waste disposed kg N/A N/A 0.00 (0.00) 0.00 (0.00) RWD‑HL High‑level radioactive waste disposed kg or m3 N/A N/A 0.00 (0.00) 0.00 (0.00) RWD‑LL Intermedial‑ and low‑level radioactive waste disposed kg or m3 N/A N/A 0.00 (0.00) 0.00 (0.00) Other Material Flows CRU Components for reuse kg N/A N/A N/A N/A MFR Materials for recycling kg N/A N/A 0.00 (0.00) 0.00 (0.00) MFER Materials for energy recovery kg N/A N/A 0.00 (0.00) 0.00 (0.00) REE Recovered energy exported from the product system MJ N/A N/A 0.00 (0.00) 0.00 (0.00) Notes: N/A – Not determined due to inconsistencies in upstream datasets. HWD – Module A3 only includes waste materials generated by asphalt plant operations and does not include waste from upstream production of electricity and fuels. NHWD – Module A3 only includes waste materials generated by asphalt plant operations and does not include waste from upstream production of electricity and fuels. RWD‑HL – Module A3 only includes waste materials generated by asphalt plant operations and does not include waste from upstream production of electricity and fuels. Waste materials from asphalt plant operations are not radioactive. RWD‑LL – Module A3 only includes waste materials generated by asphalt plant operations and does not include waste from upstream production of electricity and fuels. Waste materials from asphalt plant operations are not radioactive. CRU – Module A3 only includes output flows generated by asphalt plant operations and does not include output flows from upstream production of electricity and fuels. Output flows from asphalt plant operations are not reused as components for other product systems. MFR – Secondary material for use in the next product system. Module A3 only includes output flows generated by asphalt plant operations and does not include output flows from upstream production of electricity and fuels. MFER – Secondary fuels for use in the next product system. Module A3 only includes output flows generated by asphalt plant operations and does not include output flows from upstream production of electricity and fuels. Output flows from asphalt plant operations are inert and do not involve energy recovery. REE – Module A3 only includes output flows generated by asphalt plant operations and does not include output flows from upstream production of electricity and fuels. Recovered energy is not exported from asphalt plant operations.
8 An Environmental Product Declaration for Asphalt Mixtures Additional Environmental Information ADDITIONAL INVENTORY INDICATORS DESCRIBING EMISSIONS AND REMOVALS OF CARBON THAT ARE ACCOUNTED FOR IN GWP‑100 For transparency, the following indicators provide additional information regarding processes that are accounted for in the GWP‑100 value reported in Table 4. Many publicly available upstream inventories lack the necessary information to calculate these indicators which may result in incomplete data. TABLE 7. CARBON INDICATORS ACCOUNTED FOR IN GWP‑100 ACRONYM INDICATOR UNIT QUANTITY PER METRIC TONNE ASPHALT MIXTURE (PER SHORT TON ASPHALT MIXTURE) MATERIALS (A1) TRANSPORT (A2) PRODUCTION (A3) TOTAL (A1‑A3) GHG LUC GHG emissions from land use change kg CO 2 eq 0.00 0.00 0.00 0.00 BCPR Biogenic carbon removals associated with biogenic carbon content contained within bio‑based products kg CO 2 0.00 (0.00)
0.00
(0.00)
0.00
(0.00)
0.00 (0.00) BCPE Biogenic carbon emissions associated with biogenic carbon content contained within bio‑based products kg CO 2
0.00
(0.00)
0.00
(0.00)
0.00
(0.00)
0.00
(0.00)
BCWR Biogenic carbon emissions from combustion of waste from renewable resources used in production processes kg CO 2 0.00 (0.00) 0.00 (0.00) 0.00 (0.00) 0.00 (0.00) BCWN Carbon emissions from combustion of waste from non‑renewable resources used in production processes kg CO 2 0.00 (0.00) N/A 0.00 (0.00) 0.00 (0.00) CCAL Carbon emissions from calcination kg CO 2 0.00 (0.00)
0.00
(0.00)
0.00
(0.00)
0.00 (0.00) CCAR Carbon removals from carbonation kg CO 2
0.00
0.00
0.00
0.00
Notes: GHG LUC – Available upstream inventories for materials (A1) and transport (A2) either lack data for GHG emissions from land‑use change or indicate very low contributions to this indicator. For example, the asphalt binder dataset from Wildnauer et al. (2019) indicates that GHG emissions from land‑use change represent just 0.04% of GHG emissions associated with asphalt binder manufacturing. Similarly, GHG emissions from land‑use change associated with asphalt mixture production (A3) are considered negligible due to the relatively small size of an asphalt plant (typically five acres or less). BCPR and BCPE – This indicator is reported for materials (A1) when data is provided in upstream inventories, for example biobased asphalt binder or mixture additives. The value is zero for transport (A2) and production (A3). BCWR – This indicator is reported for materials (A1) and transport (A2) when data is provided in upstream inventories. Module A3 may be reported for some, but not all, waste renewable resources due to limitations in upstream datasets. BCWN – This indicator is reported for materials (A1) when data is provided in upstream inventories. The value is typically zero for transport (A2). Module A3 may be reported for some, but not all, waste non‑renewable resources due to limitations in upstream datasets.
9 An Environmental Product Declaration for Asphalt Mixtures END‑OF‑LIFE CONSIDERATIONS FOR PAVEMENT LCA STUDIES This is a cradle to gate EPD and does not include life cycle stages beyond the gate of the plant. According to the cut‑off rules, transportation of RAP from the pavement rehabilitation jobsite to the initial storage or processing location (module C2) is not included. When this EPD is used as a data input for an LCA study that includes the end‑of‑life stage, the recommended default value for transportation of RAP from the pavement rehabilitation site to the initial storage or processing location is 53km (33 miles). GREENHOUSE GAS (GHG) EMISSION REDUCTIONS ASSOCIATED WITH RENEWABLE ENERGY PURCHASES AND NOT ACCOUNTED FOR IN GWP‑100 This plant may use market‑based instruments to purchase renewable energy such as the use of on‑site renewable power generation, power purchase agreements (PPAs), or renewable energy certificates (RECs). As required by the PCR for Asphalt Mixtures, these market‑based instruments are not included in the calculation of GWP‑100 that is reported in the Life Cycle Impact Assessment Results. However, the potential GHG emission reduction from purchasing renewable energy through market‑based instruments is provided here as ΔGHG RE . Negative values indicate a net reduction in GHG emissions that is not accounted for in the GWP‑100 value reported in Table 4. TABLE 8. GHG EMISSION REDUCTIONS ASSOCIATED WITH RENEWABLE ENERGY PURCHASES AND NOT ACCOUNTED FOR IN GWP‑100 ACRONYM INDICATOR UNIT QUANTITY PER METRIC TONNE ASPHALT MIXTURE (PER SHORT TON ASPHALT MIXTURE) MATERIALS (A1) TRANSPORT (A2) PRODUCTION (A3) TOTAL (A1‑A3) ΔGHG RE GHG emission reduction from renewable energy purchases (market‑based accounting method) kg CO 2 Equiv. N/A N/A 0.00 (0.00) 0.00 (0.00) Notes: N/A – Not determined due to lack of information in upstream datasets. BIOGENIC CARBON UPTAKE ASSOCIATED WITH BIOFUELS THAT IS NOT ACCOUNTED FOR IN GWP‑100 As indicated in Table 4, this EPD does not assign a negative flow of CO 2 to GWP‑100 when biogenic CO 2 enters the product system through biofuels. For transparency, this value is reported here for liquid biofuels. Negative values indicate a net reduction in GHG emissions that is not accounted for in the GWP‑100 value reported in Table 4. TABLE 9. BIOGENIC CARBON UPTAKE ASSOCIATED WITH BIOFUELS AND NOT ACCOUNTED FOR IN GWP‑100 ACRONYM INDICATOR UNIT QUANTITY PER METRIC TONNE ASPHALT MIXTURE (PER SHORT TON ASPHALT MIXTURE) MATERIALS (A1) TRANSPORT (A2) PRODUCTION (A3) TOTAL (A1‑A3) BC Biofuel Biogenic carbon uptake into biofuel feedstocks kg CO 2 Equiv. N/A N/A 0.00 (0.00) 0.00 (0.00) Notes: N/A – Not determined due to lack of information in upstream datasets.
10 An Environmental Product Declaration for Asphalt Mixtures SAFETY DATA SHEET (SDS) A safety data sheet (SDS) is a document produced in alignment with the UN’s Globally Harmonized System of Classification and Labeling of Chemicals (GHS) that the manufacturer, importer, or distributor of a chemical product is required to provide to downstream users. The purpose of an SDS is to ensure that all workers who handle chemicals have the hazard information they need to safely use, handle, and store them. A copy of the SDS associated with this asphalt mixture is available at https://chemmanagement.ehs.com/9/509c4f65-68a9-4543-a40a-5c5e83a3aa05/ebinder/37457175 or by contacting zleitner@walbecgroup.com RELEASE OF DANGEROUS SUBSTANCES FROM CONSTRUCTION PRODUCTS The National Institute for Occupational Safety and Health (NIOSH) has established a recommended exposure limit (REL) for asphalt fumes of 5 mg/m 3 over a 15‑minute time weighted average. Studies of worker exposure to asphalt fumes during asphalt paving operations indicate that exposures are well below the REL during typical asphalt paving operations (NASEM, 2014). In some applications, for example when paving in an enclosed or semi‑enclosed area like a tunnel or a subterranean parking garage, personnel involved with asphalt paving operations may potentially be exposed to asphalt fumes in excess of the REL. In these situations, paving contractors should consider either using warm‑mix asphalt technologies to reduce paving application temperatures or implementing additional engineering controls or personal protective equipment to reduce occupational exposures below the REL.
11 An Environmental Product Declaration for Asphalt Mixtures References 1. ISO 14025:2006 Environmental labels and declarations — Type III environmental declarations — Principles and procedures. International Organization for Standardization, Geneva, Switzerland. https://www.iso.org/standard/38131.html. 2. ISO 21930:2017 Sustainability in buildings and civil engineering works — Core rules for environmental product declarations of construction products and services. International Organization for Standardization, Geneva, Switzerland. https://www.iso.org/standard/61694.html. 3. Product Category Rules (PCR) for Asphalt Mixtures, version 2.0, April 2022. National Asphalt Pavement Association, Greenbelt, Maryland. https://www.asphaltpavement.org/epd. 4. Product Category Rules (PCR) for Asphalt Mixtures: Annex 1: Prescribed Upstream (Secondary) Data Sources, version 2.0, April 2022. National Asphalt Pavement Association, Greenbelt, Maryland. https://www.asphaltpavement.org/epd.
5. Wildnauer, M., E. Mulholland, and J. Liddie (2019). Life Cycle Assessment of Asphalt Binder. Asphalt Institute, Lexington, Kentucky. https://www.asphaltinstitute.org/engineering/life-cycle-assessment-of-asphalt-binder/.
DECLARED PRODUCT MT-503722-HMA .605" - 16% RAP, an asphalt mix. DECLARATION OWNER
logo
Payne and Dolan, Inc. James Mertes 2625241849 https://www.walbecgroup.com/ PROGRAM OPERATOR National Asphalt Pavement Association 6406 Ivy Lane, Suite 350 Greenbelt, MD, 20770 Toll‑free: 8884686499 www.asphaltpavement.org/epd LCA AND EPD TOOL DEVELOPER Benjamin Ciavola, Ph.D., WAP Sustainability 1701 Market Street, Chattanooga, TN 37408 https://wapsustainability.com INDEPENDENT VERIFIERS John Beath Environmental, LLC The data and declarations produced by the EPD tool was externally, independently verified in accordance with ISO14025, ISO21930, and the referenced PCR. Trisha Montalbo https://goaspha.lt/3u7MIqk PRODUCT CATEGORY RULE Product Category Rules (PCR) for Asphalt Mixtures, version 2.0
National Asphalt Pavement Association 6406 Ivy Lane, Suite 350 Greenbelt, MD, 20770 Toll‑free: 8884686499 www.asphaltpavement.org/epd PCR REVIEW PCR confirmed by PCR Review Panel Led by Joep Meijer, TheRightenvironment https://goaspha.lt/3NJbyVx